The padding trick was hard-coded to a 16:9 ratio, but we can use
width and height provided from OEmbed information and width
of the card itself to calculate a new height
* Improve error handling on LinkCrawlWorker
* Ignore TimeoutError and InvalidURIError too
* Record errors to debug log
* Enable dead job queue on LinkCrawlWorker
Since most of acceptable errors were already ignored, only our side issue should go to dead job queue.
* Ignore all http gem errors
* Fix#2102 - Implement hotkeys
Hotkeys on status list:
- r to reply
- m to mention author
- f to favourite
- b to boost
- enter to open status
- p to open author's profile
- up or k to move up in the list
- down or j to move down in the list
- 1-9 to focus a status in one of the columns
- n to focus the compose textarea
- alt+n to start a brand new toot
- backspace to navigate back
* Add navigational hotkeys
The key g followed by:
- s: start
- h: home
- n: notifications
- l: local timeline
- t: federated timeline
- f: favourites
- u: own profile
- p: pinned toots
- b: blocked users
- m: muted users
* Add hotkey for focusing search, make escape un-focus compose/search
* Fix focusing notifications column, fix hotkeys in compose textarea
The whole point of verified_webfinger? is to check the WebFinger-discoverable
URI maps back to the known author URI. This was not actually verified if the
first Webfinger request was not a redirection.
* Use non-serial IDs
This change makes a number of nontrivial tweaks to the data model in
Mastodon:
* All IDs are now 8 byte integers (rather than mixed 4- and 8-byte)
* IDs are now assigned as:
* Top 6 bytes: millisecond-resolution time from epoch
* Bottom 2 bytes: serial (within the millisecond) sequence number
* See /lib/tasks/db.rake's `define_timestamp_id` for details, but
note that the purpose of these changes is to make it difficult to
determine the number of objects in a table from the ID of any
object.
* The Redis sorted set used for the feed will have values used to look
up toots, rather than scores. This is almost always the same as the
existing behavior, except in the case of boosted toots. This change
was made because Redis stores scores as double-precision floats,
which cannot store the new ID format exactly. Note that this doesn't
cause problems with sorting/pagination, because ZREVRANGEBYSCORE
sorts lexicographically when scores are tied. (This will still cause
sorting issues when the ID gains a new significant digit, but that's
extraordinarily uncommon.)
Note a couple of tradeoffs have been made in this commit:
* lib/tasks/db.rake is used to enforce many/most column constraints,
because this commit seems likely to take a while to bring upstream.
Enforcing a post-migrate hook is an easier way to maintain the code
in the interim.
* Boosted toots will appear in the timeline as many times as they have
been boosted. This is a tradeoff due to the way the feed is saved in
Redis at the moment, but will be handled by a future commit.
This would effectively close Mastodon's #1059, as it is a
snowflake-like system of generating IDs. However, given how involved
the changes were simply within Mastodon, it may have unexpected
interactions with some clients, if they store IDs as doubles
(or as 4-byte integers). This was a problem that Twitter ran into with
their "snowflake" transition, particularly in JavaScript clients that
treated IDs as JS integers, rather than strings. It therefore would be
useful to test these changes at least in the web interface and popular
clients before pushing them to all users.
* Fix JavaScript interface with long IDs
Somewhat predictably, the JS interface handled IDs as numbers, which in
JS are IEEE double-precision floats. This loses some precision when
working with numbers as large as those generated by the new ID scheme,
so we instead handle them here as strings. This is relatively simple,
and doesn't appear to have caused any problems, but should definitely
be tested more thoroughly than the built-in tests. Several days of use
appear to support this working properly.
BREAKING CHANGE:
The major(!) change here is that IDs are now returned as strings by the
REST endpoints, rather than as integers. In practice, relatively few
changes were required to make the existing JS UI work with this change,
but it will likely hit API clients pretty hard: it's an entirely
different type to consume. (The one API client I tested, Tusky, handles
this with no problems, however.)
Twitter ran into this issue when introducing Snowflake IDs, and decided
to instead introduce an `id_str` field in JSON responses. I have opted
to *not* do that, and instead force all IDs to 64-bit integers
represented by strings in one go. (I believe Twitter exacerbated their
problem by rolling out the changes three times: once for statuses, once
for DMs, and once for user IDs, as well as by leaving an integer ID
value in JSON. As they said, "If you’re using the `id` field with JSON
in a Javascript-related language, there is a very high likelihood that
the integers will be silently munged by Javascript interpreters. In most
cases, this will result in behavior such as being unable to load or
delete a specific direct message, because the ID you're sending to the
API is different than the actual identifier associated with the
message." [1]) However, given that this is a significant change for API
users, alternatives or a transition time may be appropriate.
1: https://blog.twitter.com/developer/en_us/a/2011/direct-messages-going-snowflake-on-sep-30-2011.html
* Restructure feed pushes/unpushes
This was necessary because the previous behavior used Redis zset scores
to identify statuses, but those are IEEE double-precision floats, so we
can't actually use them to identify all 64-bit IDs. However, it leaves
the code in a much better state for refactoring reblog handling /
coalescing.
Feed-management code has been consolidated in FeedManager, including:
* BatchedRemoveStatusService no longer directly manipulates feed zsets
* RemoveStatusService no longer directly manipulates feed zsets
* PrecomputeFeedService has moved its logic to FeedManager#populate_feed
(PrecomputeFeedService largely made lots of calls to FeedManager, but
didn't follow the normal adding-to-feed process.)
This has the effect of unifying all of the feed push/unpush logic in
FeedManager, making it much more tractable to update it in the future.
Due to some additional checks that must be made during, for example,
batch status removals, some Redis pipelining has been removed. It does
not appear that this should cause significantly increased load, but if
necessary, some optimizations are possible in batch cases. These were
omitted in the pursuit of simplicity, but a batch_push and batch_unpush
would be possible in the future.
Tests were added to verify that pushes happen under expected conditions,
and to verify reblog behavior (both on pushing and unpushing). In the
case of unpushing, this includes testing behavior that currently leads
to confusion such as Mastodon's #2817, but this codifies that the
behavior is currently expected.
* Rubocop fixes
I could swear I made these changes already, but I must have lost them
somewhere along the line.
* Address review comments
This addresses the first two comments from review of this feature:
https://github.com/tootsuite/mastodon/pull/4801#discussion_r139336735https://github.com/tootsuite/mastodon/pull/4801#discussion_r139336931
This adds an optional argument to FeedManager#key, the subtype of feed
key to generate. It also tests to ensure that FeedManager's settings are
such that reblogs won't be tracked forever.
* Hardcode IdToBigints migration columns
This addresses a comment during review:
https://github.com/tootsuite/mastodon/pull/4801#discussion_r139337452
This means we'll need to make sure that all _id columns going forward
are bigints, but that should happen automatically in most cases.
* Additional fixes for stringified IDs in JSON
These should be the last two. These were identified using eslint to try
to identify any plain casts to JavaScript numbers. (Some such casts are
legitimate, but these were not.)
Adding the following to .eslintrc.yml will identify casts to numbers:
~~~
no-restricted-syntax:
- warn
- selector: UnaryExpression[operator='+'] > :not(Literal)
message: Avoid the use of unary +
- selector: CallExpression[callee.name='Number']
message: Casting with Number() may coerce string IDs to numbers
~~~
The remaining three casts appear legitimate: two casts to array indices,
one in a server to turn an environment variable into a number.
* Only implement timestamp IDs for Status IDs
Per discussion in #4801, this is only being merged in for Status IDs at
this point. We do this in a migration, as there is no longer use for
a post-migration hook. We keep the initialization of the timestamp_id
function as a Rake task, as it is also needed after db:schema:load (as
db/schema.rb doesn't store Postgres functions).
* Change internal streaming payloads to stringified IDs as well
This is equivalent to 591a9af356 from
#5019, with an extra change for the addition to FeedManager#unpush.
* Ensure we have a status_id_seq sequence
Apparently this is not a given when specifying a custom ID function,
so now we ensure it gets created. This uses the generic version of this
function to more easily support adding additional tables with timestamp
IDs in the future, although it would be possible to cut this down to a
less generic version if necessary. It is only run during db:schema:load
or the relevant migration, so the overhead is extraordinarily minimal.
* Transition reblogs to new Redis format
This provides a one-way migration to transition old Redis reblog entries
into the new format, with a separate tracking entry for reblogs.
It is not invertible because doing so could (if timestamp IDs are used)
require a database query for each status in each users' feed, which is
likely to be a significant toll on major instances.
* Address review comments from @akihikodaki
No functional changes.
* Additional review changes
* Heredoc cleanup
* Run db:schema:load hooks for test in development
This matches the behavior in Rails'
ActiveRecord::Tasks::DatabaseTasks.each_current_configuration, which
would otherwise break `rake db:setup` in development.
It also moves some functionality out to a library, which will be a good
place to put additional related functionality in the near future.
Additionally, ActivityPub::FetchRemoteStatusService no longer parses
activities.
OStatus::Activity::Creation no longer delegates to ActivityPub because
the provided ActivityPub representations are not signed while OStatus
representations are.
* Return sensible HTTP status for ActivityPub inbox processing
* Return sensible HTTP status for salmon slap processing
* Return additional information to debug signature verification failures
* Add pagination in media modal
* Change array name
* Add an element class
* Avoid nested class
* Pull out the active class
* Use map instead of forEach
* Remove parentheses
* yarn manage:translations
* Add Japanese translations for #5170
* Add Japanese translations for #5123
* Add Japanese translations for #5046
* Add Japanese translations for #5099
* Add Japanese translations for #5161
* "項目" -> "絵文字"
aria-label contained body of status with content warning, which should be
hidden by default. Remove the label for the case and other cases due to
consistency.
* Make IdsToBigints (mostly!) non-blocking
This pulls in GitLab's MigrationHelpers, which include code to make
column changes in ways that Postgres can do without locking. In general,
this involves creating a new column, adding an index and any foreign
keys as appropriate, adding a trigger to keep it populated alongside
the old column, and then progressively copying data over to the new
column, before removing the old column and replacing it with the new
one.
A few changes to GitLab's MigrationHelpers were necessary:
* Some changes were made to remove dependencies on other GitLab code.
* We explicitly wait for index creation before forging ahead on column
replacements.
* We use different temporary column names, to avoid running into index
name length limits.
* We rename the generated indices back to what they "should" be after
replacing columns.
* We rename the generated foreign keys to use the new column names when
we had to create them. (This allows the migration to be rolled back
without incident.)
# Big Scary Warning
There are two things here that may trip up large instances:
1. The change for tables' "id" columns is not concurrent. In
particular, the stream_entries table may be big, and does not
concurrently migrate its id column. (On the other hand, x_id type
columns are all concurrent.)
2. This migration will take a long time to run, *but it should not
lock tables during that time* (with the exception of the "id"
columns as described above). That means this should probably be run
in `screen` or some other session that can be run for a long time.
Notably, the migration will take *longer* than it would without
these changes, but the website will still be responsive during that
time.
These changes were tested on a relatively large statuses table (256k
entries), and the service remained responsive during the migration.
Migrations both forward and backward were tested.
* Rubocop fixes
* MigrationHelpers: Support ID columns in some cases
This doesn't work in cases where the ID column is referred to as a
foreign key by another table.
* MigrationHelpers: support foreign keys for ID cols
Note that this does not yet support foreign keys on non-primary-key
columns, but Mastodon also doesn't yet have any that we've needed to
migrate.
This means we can perform fully "concurrent" migrations to change ID
column types, and the IdsToBigints migration can happen with effectively
no downtime. (A few operations require a transaction, such as renaming
columns or deleting them, but these transactions should not block for
noticeable amounts of time.)
The algorithm for generating foreign key names has changed with this,
and therefore all of those changed in schema.rb.
* Provide status, allow for interruptions
The MigrationHelpers now allow restarting the rename of a column if it
was interrupted, by removing the old "new column" and re-starting the
process.
Along with this, they now provide status updates on the changes which
are happening, as well as indications about when the changes can be
safely interrupted (when there are at least 10 seconds estimated to be
left before copying data is complete).
The IdsToBigints migration now also sorts the columns it migrates by
size, starting with the largest tables. This should provide
administrators a worst-case scenario estimate for the length of
migrations: each successive change will get faster, giving admins a
chance to abort early on if they need to run the migration later. The
idea is that this does not force them to try to time interruptions
between smaller migrations.
* Fix column sorting in IdsToBigints
Not a significant change, but it impacts the order of columns in the
database and db/schema.rb.
* Actually pause before IdsToBigints
* Fix order of paginated accounts in FollowerDomainsController
Unordered pagination could result in unexpected behavior.
* Cover Settings::FollowerDomainsController more
Translate "about" page, several settings pages, data export/import,
sessions overview, authorized followers page, account deletion page.
More consistent use of words:
- A toot is a Beitrag.
- An account is a Konto.
Some small improvements.
I see no reason to allow more than that. Usually a redirect is
HTTP->HTTPS, then maybe URL structure changed, but more than that
is highly unlikely to be a legitimate use case.
If the signature could not be verified and the webfinger of the account
was last retrieved longer than the cache period, try re-resolving the
account and then attempting to verify the signature again
* Fix#117 - Add ability to specify alternative text for media attachments
- POST /api/v1/media accepts `description` straight away
- PUT /api/v1/media/:id to update `description` (only for unattached ones)
- Serialized as `name` of Document object in ActivityPub
- Uploads form adjusted for better performance and description input
* Add tests
* Change undo button blend mode to difference
- Previously they wouldn't receive it unless they were author's
followers
- Skip unpush from public/hashtag timelines if status wasn't
public in the first place
- 500.html generated with admin-set default locale if set
- Error page `<title>` includes Mastodon site title
- 500 title changed to "This page is not
correct" (ref: <https://www.youtube.com/watch?v=2VCAP_seh1A>)
- 500 content appended with "on our end" to make clear it's
not user's fault
A new rake task emojis:generate downloads a full list of valid
unicode sequences from unicode.org and checks it against existing
Twemoji files, finally generating a map from each sequence to the
existing file (e.g. when there's multiple ways an emoji can be
expressed). The map is dumped into app/javascript/mastodon/emoji_map.json
That file is loaded by emojione_light.js (now a misnomer) which
decorates it further with shortcodes taken from emoji-mart's index.
We added horizontal layout to preview card for wide image. However, max height of the thumbnail is still limited to 120px and it makes nearly square images to too small for that layout.
This PR increases max height as well as max width.
* Add emoji autosuggest
Some credit goes to glitch-soc/mastodon#149
* Remove server-side shortcode->unicode conversion
* Insert shortcode when suggestion is custom emoji
* Remove remnant of server-side emojis
* Update style of autosuggestions
* Fix wrong emoji filenames generated in autosuggest item
* Do not lazy load emoji picker, as that no longer works
* Fix custom emoji autosuggest
* Fix multiple "Custom" categories getting added to emoji index, only add once
Currently we're using a list of MIME types for `accept` attribute on `input[type="file"]` for filter options of file picker, and actual file extensions will be infered by browsers. However, infered extensions may not include our expected items. For example, "image/jpeg" seems to be infered to
only ".jfif" extension in Firefox.
To ensure common file extensions are in the list, this PR adds file extensions in addition to MIME types. Also having items in both format is encouraged by HTML5 spec.
https://www.w3.org/TR/html5/forms.html#file-upload-state-(type=file)
* Fix JavaScript interface with long IDs
Somewhat predictably, the JS interface handled IDs as numbers, which in
JS are IEEE double-precision floats. This loses some precision when
working with numbers as large as those generated by the new ID scheme,
so we instead handle them here as strings. This is relatively simple,
and doesn't appear to have caused any problems, but should definitely
be tested more thoroughly than the built-in tests. Several days of use
appear to support this working properly.
BREAKING CHANGE:
The major(!) change here is that IDs are now returned as strings by the
REST endpoints, rather than as integers. In practice, relatively few
changes were required to make the existing JS UI work with this change,
but it will likely hit API clients pretty hard: it's an entirely
different type to consume. (The one API client I tested, Tusky, handles
this with no problems, however.)
Twitter ran into this issue when introducing Snowflake IDs, and decided
to instead introduce an `id_str` field in JSON responses. I have opted
to *not* do that, and instead force all IDs to 64-bit integers
represented by strings in one go. (I believe Twitter exacerbated their
problem by rolling out the changes three times: once for statuses, once
for DMs, and once for user IDs, as well as by leaving an integer ID
value in JSON. As they said, "If you’re using the `id` field with JSON
in a Javascript-related language, there is a very high likelihood that
the integers will be silently munged by Javascript interpreters. In most
cases, this will result in behavior such as being unable to load or
delete a specific direct message, because the ID you're sending to the
API is different than the actual identifier associated with the
message." [1]) However, given that this is a significant change for API
users, alternatives or a transition time may be appropriate.
1: https://blog.twitter.com/developer/en_us/a/2011/direct-messages-going-snowflake-on-sep-30-2011.html
* Additional fixes for stringified IDs in JSON
These should be the last two. These were identified using eslint to try
to identify any plain casts to JavaScript numbers. (Some such casts are
legitimate, but these were not.)
Adding the following to .eslintrc.yml will identify casts to numbers:
~~~
no-restricted-syntax:
- warn
- selector: UnaryExpression[operator='+'] > :not(Literal)
message: Avoid the use of unary +
- selector: CallExpression[callee.name='Number']
message: Casting with Number() may coerce string IDs to numbers
~~~
The remaining three casts appear legitimate: two casts to array indices,
one in a server to turn an environment variable into a number.
* Back out RelationshipsController Change
This was made to make a test a bit less flakey, but has nothing to
do with this branch.
* Change internal streaming payloads to stringified IDs as well
Per
https://github.com/tootsuite/mastodon/pull/5019#issuecomment-330736452
we need these changes to send deleted status IDs as strings, not
integers.
* Add support for selecting a theme
* Fix codeclimate issues
* Look up site default style if current user is not available due to e.g. not being logged in
* Remove outdated comment in common.js
* Address requested changes in themes PR
* Fix codeclimate issues
* Explicitly check current_account in application controller and only check theme availability if non-nil
* codeclimate
* explicit precedence with &&
* Fix code style in application_controller according to @nightpool's suggestion, use default style in embedded.html.haml
* codeclimate: indentation + return
* Custom emoji
- In OStatus: `<link rel="emoji" name="coolcat" href="http://..." />`
- In ActivityPub: `{ type: "Emoji", name: ":coolcat:", href: "http://..." }`
- In REST API: Status object includes `emojis` array (`shortcode`, `url`)
- Domain blocks with reject media stop emojis
- Emoji file up to 50KB
- Web UI handles custom emojis
- Static pages render custom emojis as `<img />` tags
Side effects:
- Undo #4500 optimization, as I needed to modify it to restore
shortcode handling in emojify()
- Formatter#plaintext should now make sure stripped out line-breaks
and paragraphs are replaced with newlines
* Fix emoji at the start not being converted
* So Spanish. Much changes. Wow.
* Some little fixes
* Updated es.yml, and fixed some ortographical errors
* Some little changes to simple_form.es.yml
* Yeah, so much translations
* Spanish e-mail messages
* Remove unused message
We had returned `nil` for that case, but this raises an error instead, as a wrong usage of the method.
This method is currently only used in ActivitySerializer.
* zh-*: transition from "like" back to "fav"
This commit reverts the translation for the yellow-star "fav" button
back to "fav" in Chinese. Some ambuiguity between "like" and "fav" is
deliberately used in zh-TW/HK by using the existing phrase "最爱"
(favorite (adj.), lit. love-most) instead of "收藏" (favourite (v.),
"collect") in some instances.
Fixes#3511.
* zh-*: apply suggestions for PR #4557
* zh-cn: de-monetize ya account
In Chinese two separate characters, 账 and 帐, can be used to spell the
word for account (账/帐户). However, the one with a 贝 on the left is
evolved from the latter specifically for monetary purposes. Since
people usually can't figure out which one to use, it might be a good
idea to use the original not-so-money one.
* zh-*: complete jsx translation
* Adjust landing pages 2
Fix styles of terms page
Remove action buttons from timeline in about page
Adjust styles of short description
Adjust form inputs
Set autocomplete off for username and email box in registration form. Remove line breakings.
* Revert removing action buttons
`Status#reply?` may returns true even if the thread is missing.
e.g. the replied status was deleted or couldn't be fetched.
Then it raises NoMethodError on various AP json serialization.
This issue won't happen on Atom serialization because it checks thread
existence using `StreamEntry#threaded?` instead.
* Fix behavior while the button is invisible
e.g. pointer cursor, couldn't open contextmenu
* Avoid rendering the button to remove blank space if no more items are available or no items are rendered
* Revert "Enable UniqueRetryJobMiddleware even when called from sidekiq worker (#4836)"
This reverts commit 6859d4c028.
* Revert "Do not execute the job with the same arguments as the retry job (#4814)"
This reverts commit be7ffa2d75.
* l10n update for Redesign video player (#4911)
* Update videp
* Update
I hope this time format works well.
* One missing string
* Update time format
I'd like the complete name of the month in the Long format and the short one in the short format.
I hope it works now
* Support OpenGraph video embeds
It's not really OpenGraph, it's twitter:player property, but it's
not OEmbed so that fits. For example, this allows Twitch clips to
be displayed as embeds.
Also, fixesglitch-soc/mastodon#135
* Fix invalid OpenGraph cards being saved through attaching and
revisit URLs after 14 days
* Redesign video player
* Use new video player on static public pages too
* Use media gallery component on static public pages too
* Pause video when hiding it
* Full-screen sizing on WebKit
* Add aria labels to video player buttons
* Display link card on public status page
* Fix fullscreen from modal sizing issue
* Remove contain: strict property to fix fullscreen from columns
* Fix ActivityPub handling of replies when LOCAL_DOMAIN ≠ WEB_DOMAIN (#4895)
For all intents and purposes, `local_url?` is used to check if an URL refers
to the Web UI or the various API endpoints of the local instances. Those things
reside on `WEB_DOMAIN` and not `LOCAL_DOMAIN`.
* Change local_url? spec, as all URLs handled by Mastodon are based on WEB_DOMAIN
* Whenever a remote keypair changes, unfollow them and re-subscribe to them
In Mastodon (it could be different for other OStatus or AP-enabled software),
a keypair change is indicative of whole user (or instance) data loss. In this
situation, the “new” user might be different, and almost certainly has an empty
followers list. In this case, Mastodon instances will disagree on follower
lists, leading to unreliable delivery and “shadow followers”, that is users
believed by a remote instance to be followers, without the affected user
knowing.
Drawbacks of this change are:
1. If an user legitimately changes public key for some reason without losing
data (not possible in Mastodon at the moment), they will have their remote
followers unsubscribed/re-subscribed needlessly.
2. Depending of the number of remote followers, this may generate quite some
traffic.
3. If the user change is an attempt at usurpation, the remote followers will
unknowingly follow the usurper. Note that this is *not* a change of
behavior, Mastodon already behaves like that, although delivery might be
unreliable, and the usurper would not have known the former user's
followers.
* Rename ResubscribeWorker to RefollowWorker
* Process followers in batches
This PR adds section for protocol specific information, then always show
both of OStatus and ActivityPub. Specifically, this will help admins to
check PuSH subscription status and unsubscribe manually, even `protocol`
has been changed.
This also includes below changes:
* Add `overflow: hidden` to prevent float leaking
* Add missing fields for ActivityPub
They are marked as read-only by Rails, but we know what we are doing,
so we are un-marking them as such.
The mastodon:maintenance:update_counter_caches task is not really
supposed to be run anymore (it was a one-time thing during an upgrade)
however, just in case, I have modified it to not touch ActivityPub
accounts.
Also, no point writing to logger from these rake tasks, since they
are not to be run from cron. Better to give stdout feedback.
When a new user confirms their e-mail, bootstrap their home timeline
by automatically following a set of accounts. By default, all local
admin accounts (that are unlocked). Can be customized by new admin
setting (comma-separated usernames, local and unlocked only)
Resolved:
* Lot of redundant renders while mouse moving
* Scroll jumping when timeline loaded
* Scroll position isn't kept when statuses below the scrollTop was deleted then new status arrived
Unresolved:
* Scroll position isn't kept when statuses over the scrollTop was deleted then new status arrived
-> It needs to know which statuses are over the scrollTop
* New status indicator should be active when new statuses arrived while mouse moved recently
-> It needs a) update indicator in ScrollableList, or b) set scrollTop status while mouse moving
To reflect status posting immediately, we've inserted the status into timelines directly. However, status insertion changes "latest status", and it means next timeline refresh only fetches statuses since the inserted status. This behavior is very bad for disconnected timeline and mobile views.
After this patch, it refreshes timeline for disconnected timelines, instead of direct insertion.
In before, the method uses stream_entry id as status id, so replied status was wrongly selected.
This PR uses StatusFinder which was introduced with `Api::Web::EmbedsController`.
* Fix language filter codes
CLD3 returns BCP-47 language identifier, filter settings expect
identifiers in the ISO 639-1 format. Convert between formats,
and exclude duplicate languages from filter choices (zh-CN->zh)
* Fix zh name
* Add Pinned_toot_section
* Fix add frozen_string_literal
* Fix delete no need controller and tests
* Fix replace query strings to axios params
* Fix change value to accountId and disabling more button
* Decouple Status#local? from uri being nil
* Replace on-the-fly URI generation with stored URIs
- Generate URI in after_save hook for local statuses
- Use static value in TagManager when available, fallback to tag format
- Make TagManager use ActivityPub::TagManager to understand new format
- Adjust tests
* Use other heuristic for locality of old statuses, do not perform long query
* Exclude tombstone stream entries from Atom feed
* Prevent nil statuses from landing in Pubsubhubbub::DistributionWorker
* Fix URI not being saved (#4818)
* Add more specs for Status
* Save generated uri immediately
and also fix method order to minimize diff.
* Fix alternate HTML URL in Atom
* Fix tests
* Remove not-null constraint from statuses migration to speed it up
* Adjust status embeds
Adjust styles of embed code. Adjust styles of embed pages. Fix overflow of embed-modal.
* Remove trailing whitespace
* Using width from the variable
- Fix assumption that `url` is always a string. Handle it if it's an
array of strings, array of objects, object, or string, both for
accounts and for objects
- `sharedInbox` is actually supposed to be under `endpoints`, handle
both cases and adjust the serializer
* Make "unfollow" undo pending outgoing follow request too
* Add cancel button to web UI when awaiting follow request approval
* Make the hourglass button do the cancelling
* Raise an error for remote url in StatusFinder
Previous implementation had allowed remote url with status id which also exists on local.
Then that bug leads /api/web/embed to return wrong embed url.
* Fix oembed_controller_spec
* UploadArea should only preventDefault for Escape
This will make accessibility for some things less effortful, since we won't have to define a prior event handler to do whatever should be happening by default.
* Remove workaround for fixed bug in SettingToggle
SettingToggle was toggling itself in response to keydown of space, and then the keyup was doing it again
Using _: property names is discouraged, as in the future,
canonicalization may throw an error when encountering that instead
of discarding it silently like it does now.
We are defining some ActivityStreams properties which we expect
to land in ActivityStreams eventually, to ensure that future versions
of Mastodon will remain compatible with this even once that happens.
Those would be `locked`, `sensitive` and `Hashtag`
We are defining a custom context inline for some properties which we
do not expect to land in any other context. `atomUri`, `inReplyToAtomUri`
and `conversation` are part of the custom defined OStatus context.
* Fix a style issue on the public profile page for some mobile browsers
Signed-off-by: Cygnan <email@cygnan.com>
* Set padding-bottom to 20px
Signed-off-by: Cygnan <email@cygnan.com>
* Make PreviewCard records reuseable between statuses
**Warning!** Migration truncates preview_cards tablec
* Allow a wider thumbnail for link preview, display it in horizontal layout (#4648)
* Delete preview cards files before truncating
* Rename old table instead of truncating it
* Add mastodon:maintenance:remove_deprecated_preview_cards
* Ignore deprecated_preview_cards in schema definition
* Fix null behaviour
- Ask for desktop notifications after 1 minute of use instead of
instantly
- Ask for protocol handler permission after 5 minutes of use
instead of instantly
* Make the fr locales up-to-date with the last changes (new profile view, applications)
* Use the same wording for toots in fr.yml and fr.json
* Translate the pin related strings
* Translate pin-related locales on the front-end
* Add missing locales in doorkeeper.fr.yml and remove un-used ones
* Change "posts" back to "status" in the /about/more page in fr.yml
* Fix typos for "status" in fr.yml
* fix typo for "status" in fr.json
* Remove duplicate string
* Non-breaking space before punctuation
* 'Better' translation for "unpin"
* Put back 'pouet' where it was already
* Fix
* Fix
* Refactor Web::PushSubscription, remove welcome message
* Add missing helper
* Use locale of the receiver on push notifications (#4519)
* Remove unused translations
* Fix dir on notifications
Currently, private / direct posts via OStatus from AP compatible instance will be dropped due to failing to fetch AP version.
So this fallbacks to OStatus handling:
* when failed to fetch ActivityPub version
* when status is neither :public nor :unlisted
* Guarantee Subscription service first account has proper URL details
Subscription Service potentially could break if the first user suspended
themselves, creating a situation where the urls that populate throughout
subscription service's PuSH request would cause the remote API to throw 503 errors.
Guaranteeing that the first account picked is not suspended prevents this problem.
* Fix style issue
- Use statuses controller for embeds instead of stream entries controller
- Prefer /@:username/:id/embed URL for embeds
- Use /@:username as author_url in OEmbed
- Add follow link to embeds which opens web intent in new window
- Use redis cache in development
- Cache entire embed
Requires moving Atom rendering from DistributionWorker (where
`stream_entry.status` is already nil) to inline (where
`stream_entry.status.destroyed?` is true) and distributing that.
Unfortunately, such XML renderings can no longer be easily chained
together into one payload of n items.
Commit 9d1f8b9d6a scrolls the columns area
when the route changes since the user is likely to want to see the
rightmost column in such cases.
However, redirection is automatic and does not indicate users' intension.
Do not scroll the columns area due to one.
* Adjust "signed in as" pages
Fix min-width
Set width of .account-header .name
To apply text-overflow and overflow settings
Set overflow for detailed-status__display-name
* Remove trailing whitespace
* Adjust account-grid in public profiles
Full-width card on mobile UI. Set break-word for long name and ID. Fix margin.
* Reduce padding-bottom of public profiles
* Revive next prev buttons in mobile public profiles
In followers followees pages.
* Revert break-word for username
* Fix overflow of display_name
Need re-setting text-overflow and overflow in display: block;
SerializarbleResource#as_json serializes to Symbol keyed Hash, but current
implementation of LinkedDataSignature expects String keyed Hash.
So it generates broken payload.
* Add handling of Linked Data Signatures in payloads
* Add a way to sign JSON, fix canonicalization of signature options
* Fix signatureValue encoding, send out signed JSON when distributing
* Add missing security context
* Added new translations of error messages, block and mute domains and users
* Added new translations of error messages, block and mute domains and users
* Allow multiple pinned statuses to be shown and make them be ordered by pinned date
* Set timestamps NOT NULL
* Make single-line pinned_statuses
* Spec for pinned_statuses
* Remove redundant empty line
* Process Create / Announce activity in FetchRemoteStatusService
* Use activity URL in ActivityPub for reblogs
* Redirect to the original status on StatusesController#show
* Ignore empty response in ActivityPub::FetchRemoteStatusService
This fixes `NoMethodError: undefined method `[]' for nil:NilClass` error.
* Check json.nil? in JsonLdHelper#supported_context?
* Add code for creating/managing apps to settings section
* Add specs for app changes
* Fix controller spec
* Fix view file I pasted over by mistake
* Add locale strings. Add 'my apps' to nav
* Add Client ID/Secret to App page. Add some visual separation
* Fix rubocop warnings
* Fix embarrassing typo
I lost an `end` statement while fixing a merge conflict.
* Add code for creating/managing apps to settings section
- Add specs for app changes
- Add locale strings. Add 'my apps' to nav
- Add Client ID/Secret to App page. Add some visual separation
- Fix some bugs/warnings
* Update to match code standards
* Trigger notification
* Add warning about not sharing API secrets
* Tweak spec a bit
* Cleanup fixture creation by using let!
* Remove unused key
* Add foreign key for application<->user
* Fallback to OStatus in FetchAtomService
* Skip activity+json link if that activity is Person without inbox
* If unsupported activity was detected and all other URLs failed, retry with ActivityPub-less Accept header
* Allow mention to OStatus account in ActivityPub
* Don't update profile with inbox-less Person object
- Tries to avoid performing HTTP request if the keyId is an actor URI
- Likewise if the URI is a fragment URI on top of actor URI
- Resolves public key, returns owner if the owner links back to the key
* ActivityPub migration procedure
Once one account is detected as going from OStatus to ActivityPub,
invalidate WebFinger cache for other accounts from the same domain
* Unsubscribe from PuSH updates once we receive an ActivityPub payload
* Re-subscribe to PuSH unless already unsubscribed, regardless of protocol
*Note: OStatus URIs are invalid for ActivityPub. But we have them for
as long as we want to keep old OStatus-sourced content and as long as
we remain OStatus-compatible.*
- In Announce handling, if object URI is not a URL, fallback to object URL
- Do not use specialized ThreadResolveWorker, rely on generalized handling
- When serializing notes, if parent's URI is not a URL, use parent's URL
* Add protocol field
* Switch protocol specific information according to active protocol
* Hide PuSH subscription related buttons if ActivityPub is active
* Ajout de traductions manquantes
Ajoute des traductions pour les chaînes n’en ayant pas en version 1.5.1.
Add translations for the strings that are missing them in 1.5.1.
* Remplace « ' » par « ’ »
Retire de la traduction les apostrophes droites « ' » (U+0027) au profit des apostrophes typographiques « ’ » (U+2019).
En typographie française, les apostrophes typographiques sont utilisées à la place des apostrophes droites. La traduction était incohérente et utilisait les deux.
Remove from the translation all the vertical apostrophes (U+0027) in favor of the curly ones (U+2019).
In French typography, typographic apostrophes are used instead of vertical ones. The translation was incoherent and used both.
* Ajout d’espaces insécables
Ajoute des espaces insécables suivant les régles nécessaires en typographie française.
Add non-breaking spaces following rules of French typography.
* Remplace « status » par « statut »
Remplace le mot anglais « status » par sa traduction française « statut ».
Replace the English word "status" by its French translation "statut".
* Correction de la politique de confidentialité
Apporte diverses corrections à la traduction de la politique de confidentialité.
Add various fixes to the privacy policy's translation.
* Remplace « mentionné » par « mentionné·e »
Harmonise la traduction en remplaçant « mentionné » par sa forme épicène.
Harmonize the translation by replacing "mentionné" (sure) by its epicene form.
* Remplace « Coup d’œil » par « Jeter un coup d’œil… »
Remplace la première traduction par une forme plus proche de la version originelle.
Replace the first translation by something closer to the original version.
* Remplace « Bon Appétoot ! » par « Bon appouetit ! »
Remplace « Bon Appétoot ! » par « Bon appouetit ! » pour essayer de conserver le jeu de mot.
Replace « Bon Appétoot ! » by « Bon appouetit ! » to keep the pun.
* Remplace « Bon Appétoot ! » par « Bon appouetit ! » (2)
Remplace « Bon Appétoot ! » par « Bon appouetit ! » pour essayer de conserver le jeu de mot.
Replace « Bon Appétoot ! » by « Bon appouetit ! » to keep the pun.f
* Corrections
Corrige des fautes d’orthographe et change « appouetit » pour « appouétit ».
Correct some mistakes and change "appouetit" to "appouétit".
To be able to pull some basic statistics from a Mastodon instance, include the
user, status and connected domain counters in the `/api/v1/instance` response.
Fixes#3570.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
* Add ActivityPub inbox
* Handle ActivityPub deletes
* Handle ActivityPub creates
* Handle ActivityPub announces
* Stubs for handling all activities that need to be handled
* Add ActivityPub actor resolving
* Handle conversation URI passing in ActivityPub
* Handle content language in ActivityPub
* Send accept header when fetching actor, handle JSON parse errors
* Test for ActivityPub::FetchRemoteAccountService
* Handle public key and icon/image when embedded/as array/as resolvable URI
* Implement ActivityPub::FetchRemoteStatusService
* Add stubs for more interactions
* Undo activities implemented
* Handle out of order activities
* Hook up ActivityPub to ResolveRemoteAccountService, handle
Update Account activities
* Add fragment IDs to all transient activity serializers
* Add tests and fixes
* Add stubs for missing tests
* Add more tests
* Add more tests
* Revert "Adjust tags and accounts page (#4534)"
This reverts commit a3e53bd442.
* Revert "feat: Cache status height to avoid expensive renders (#4439)"
This reverts commit 8eb6d171e6.
* Revert "Refactor Avatar and AvatarOverlay to have 'account' as prop instead of src and staticSrc (#4526)"
This reverts commit 5942347407.
* Revert "Update dependencies for Ruby (#4543)"
This reverts commit 22db947225.
* Revert "[Docker] Add multicore support to "make" and "bundler" (#4544)"
This reverts commit 5d408fd9aa.
* Revert "It makes no sense to try using invalid or expired link again (#4521)"
This reverts commit 47579ec58c.
* Revert "i18n: Update Polish translation (#4545)"
This reverts commit 3363a05539.
* Revert "Set false to animated options for thumbnail processor (#4547)"
This reverts commit 87f10d476c.
* Refactored Avatar and AvatarOverlay (DRY) to have 'account' as prop.
Also removed animate attribute from compose navigation bar, which should
have never been there. Added test for avatar overlay.
* fix broken tests
* god dammit another bug in tests! travis please let this pass
* formatting in avatar overlay
The feature to pin column could hide the rightmost column, which is
specified with children property of ColumnsArea.
The user is likely to see the column when the property changed, so scroll
the area in such cases.
* fix(status_action_bar): Use aria-pressed for reblog and favourite button
* fix(column_back_button): Keyboard accessible
* fix(status_content): Make focusable and accessible
* fix(dropdown_menu): Use aria-expanded instead of aria-pressed
* fix(emoji_picker_dropdown): Use aria-expanded instead of aria-hidden
* feat(icon_button): Add aria-expanded
* fix(privacy_dropdown): Use aria-expanded instead of aria-hidden
* Fix protruded infomation board section
Set "flexwrap: wrap" for sections. Set upper and lower padding for each section, and adjust clearances around sections accordingly. Settings for viewport threshold 500px is no more needed.
* Fix mistake of reducing information-board padding
In according with this fix, additional padding setting for maximum 840px width is no more needed.
* fix(web_push_notification): Do not hard reload tab
* fix(web_push_notification_worker): Guard against null subscription
* refactor: Incorporate pull request feedback
* fix(dropdown_menu): Keyboard navigation
* fix(icon_button): Add aria-pressed attribute
* fix(privacy_dropdown): Make accessible
* fix(emoji_picker_dropdown): Make accessible
* fix(icon_button): Support tabIndex
* fix(actions_modal): Remove icon from tab order
* fix(dropdown_menu): Add role=group
* fix(setting_toggle): Toggle via space key
* fix(dropdown_menu): Remove redundant handling of Space key
* fix(emoji_picker_dropdown): Remove redundant Space key handling
* fix(privacy_dropdown): Remove redundant Space key handling
* fix(status): Switch to article and add aria-posinset, aria-setsize
* fix(status_list): Use role=feed and pass more ARIA props to Status
* chore(eslint): jsx-a11y/role-supports-aria-props
* fix(dropdown_menu): Open as modal on mobile
* fix(dropdown_menu): Open modal on touch
* fix(dropdown_menu): Show status
* fix(dropdown_menu): Max dimensions and reduce padding
* chore(dropdown_menu): Test new functionality
* refactor: Use DropdownMenuContainer instead of DropdownMenu
* feat(privacy_dropdown): Open as modal on touch devices
* feat(modal_root): Do not load actions-modal async
`height: 100%` in `align-self: stretch` flexboxes doesn't work on Safari < 11.
https://bugs.webkit.org/show_bug.cgi?id=137730
This workaround uses flexbox instead of `height: 100%` to stretch height.
* fix(column_header): Invalid ARIA role
* fix(column): Remove hidden nodes from the DOM
* refactor(column_link): Remove unused property hideOnMobile
* fix(column_header): Use aria-pressed
* fix(column_header): Make collapsed content not focusable, add focusable property
* fix(column_loading): Make header non-focusable
* fix(column_settings): Use role to group the toggles
* Fix padding in hero container, landing page
Erase hero container padding to fit registration form to full width. By this setting, heading padding disappears, so I adjust heading padding.
* Specify attribute strictly for heading padding
To overwrite padding-bottom in superior settings.
* Make padding shorthand more concise
* fix(compose): Use nav and remove redundant aria-label
* fix(tabs_tab): Use nav and add aria-label
* fix(app): Add aria-label for settings toggle button
* chore: Run yarn manage:translations
* Adjust mobile landing page
Change mobile viewport threshold to 840px in consideration of padding. Fix loss of "container hero" padding in about/more under 675px.
* Fix indent
* Update and expanding Dutch strings for 1.5
Only privacy policy is not translated, but is included. Hopefully I have time to translate this another time (you can set your own privacy policy now anyway).
* Missing file
* A few changes cause of changes in another file
* Fix
* Update Dutch strings for 1.5
* nl
* fix
don't know how that ended up there
* Update nl.yml
Setting only padding-left made the logo left-shifted on mobile page. Margin-right was old setting for adjusting clearance between old logo and letter "Mastodon".
* Allow domain blocks to reject media without silencing or suspending
* Fix typo
* Hide 'Reject media' button when superfluous, instead of disabling it
* Properly hide 'reject media' checkbox on page load if needed
This may happen when resubmitting the domain block form after an error.
* Don't ask whether undoing a media-only block should be retroactive
* Rename :media_only block to :noop
* Display :noop block as None in frontend, allow blocks that do nothing
* Remove 'coding' line auto-added by emacs
Change the placeholder used in the content warning field from "Content Warning" to "Write your warning here". This change should made it easier to understand what the field is about.
Change le message de substitution utilisé dans le champ d’avertissement de « Avertissement » à « Écrivez ici votre avertissement ». Ce changement devrait rendre plus évidente la fonction du champ.
* add fr-FR locales to the landing page
* moar french locales
* terms of service/privacy policy
* remove un-used locales in the client (yarn manage:translations)
* update french locales in the client
* remove duplicate locales in fr.yml
* fix typos per PR comments in fr.yml
* put back default messages
* translate untranslated keys on the client
* add "push" after notifications
* correctly ident ToS in fr.yml
* Use the same emoji data on the frontend and backend
* Move emoji.json to repository, add tests
This way you don't need to install node dependencies if you only
want to run Ruby code
* feat(compose): More space on mobile devices
* feat(compose): Hide navigation when typing on mobile devices
* fix(compose): Make animation faster
* fix(navigation_bar): Remove hardcoded title
* fix(compose): Prevent accidental bluring
* fix(compose): Increase max-height to 600px
* Do not raise unretryable exceptions in ResolveRemoteAccountService
* Removed fatal exceptions from ResolveRemoteAccountService
Exceptions that cannot be retried should not be raised. New exception
class for those that can be retried (Mastodon::UnexpectedResponseError)
* Refactor ResolveRemoteAccountService
* Remove trailing whitespace
* Use redis locks around critical ResolveRemoteAccountService code
* Add test for race condition of lock
* Wrap methods of ProcessFeedService::ProcessEntry in classes
This is a change same with 425acecfdb, except
that it has the following changes:
* Revert irrelevant change in find_or_create_conversation
* Fix error handling for RemoteActivity
* Introduce Ostatus name space
app/javascript/mastodon/main.js delayed the execution of modules,
but other entry points didn't. That leads to failure in executing
modules, which requires those polyfills.
Strictly enforce the rule to require any modules after loading
polyfill in entry points.
Though size of extended-video-player is already fixed to 80vw*80vh in components.scss, player size was also set to original video size in extended_video_player.js. Video size is fixed to 80vw*80vh, so video player's size must also be fixed to 80vw*80vh.
* Shrink too wide single image modal
Fix too wide react-swipeable-view-container
Fix 0067f80 shrinking all react-swipeable-view-container
Change to apply max-width of react-swipeable-view-container only under media-modal.
Fix b30b03b just a typo
* Centering contents in image-loader
Centering small img, canvas, and video in image-loader.
* Add dependency on idn-ruby to speed up URI normalization
* Use normalized_host instead of normalize.host when applicable
When we are only interested in the normalized host, calling normalized_host
avoids normalizing the other components of the URI as well as creating a
new object
* Improve webfinger templates and make tests more flexible
* Clean up AS2 representation of actor
* Refactor outbox
* Create activities representation
* Add representations of followers/following collections, do not redirect /users/:username route if format is empty
* Remove unused translations
* ActivityPub endpoint for single statuses, add ActivityPub::TagManager for better
URL/URI generation
* Add ActivityPub::TagManager#to
* Represent all attachments as Document instead of Image/Video specifically
(Because for remote ones we may not know for sure)
Add mentions and hashtags representation to AP notes
* Add AP-resolvable hashtag URIs
* Use ActiveModelSerializers for ActivityPub
* Clean up unused translations
* Separate route for object and activity
* Adjust cc/to matrices
* Add to/cc to activities, ensure announce activity embeds target status and
not the wrapper status, add "id" to all collections
* Add Request class with HTTP signature generator
Spec: https://tools.ietf.org/html/draft-cavage-http-signatures-06
* Add HTTP signature verification concern
* Add test for SignatureVerification concern
* Add basic test for Request class
* Make PuSH subscribe/unsubscribe requests use new Request class
Accidentally fix lease_seconds not being set and sent properly, and
change the new minimum subscription duration to 1 day
* Make all PuSH workers use new Request class
* Make Salmon sender use new Request class
* Make FetchLinkService use new Request class
* Make FetchAtomService use the new Request class
* Make Remotable use the new Request class
* Make ResolveRemoteAccountService use the new Request class
* Add more tests
* Allow +-30 seconds window for signed request to remain valid
* Disable time window validation for signed requests, restore 7 days
as PuSH subscription duration (which was previous default due to a bug)
* chore(yarn): Install babel-plugin-preval as development dependency
* feat(babel): Add preval as a plugin
* feat(emojione_light): Prevaled module what tree-shaked emojione
* refactor(emoji): Use emojione_light
* feat: Preload emojione_picker bundle
* fix(emojione_light): Do not use Object.entries
* fix(emojify): Update tests
* chore(emojione_light): Remove silly ascii art
- Use unicode when selecting emoji through picker
- Convert shortcodes to unicode when storing text input server-side
- Do not convert shortcodes in JS anymore
Render function for BundleContainer must not be methods.
React doesn't know dependency of the method, so they won't rerender on property updates.
In this case, when you close modal and open another modal immediately,
old modal will be open instead of new one.
